X-Sense WiFi Hygrometer Indoor Humidity with SBS50 Base Station, Smart Hygrometer Thermometer with App Notification, Temperature Sensor for Room Temperature Monitoring, 3 Sensors & 1 Base Station

Remotely and reliably monitor temperature and humidity
This is a great product for remotely monitoring temperature and humidity. It works exceptionally well, is a breeze to setup. The app supports multiple base stations as well so you can have multiple locations if necessary. For me, I have 2 base stations — one that I use to monitor my barn, farm office, and greenhouse, and the other that monitors my beehives — I place the sensors inside the hives. I do wish the thermo hygrometer sensors were a bit smaller, like Govees, but other than that have zero complaints. Battery life is very good. App performance is excellent and can easily view timeline trends per sensor by day, week, etc. A trend line report that would show all of a base stations connected sensors would be nice but there isn’t one currently. I have not tried any of X-Senses other sensors or safety / smoke detectors but if I had a need wouldn’t hesitate to add them to my systems.

Great for Guitar Display Case Monitoring
I’m using it to monitor temperature and (mainly) humidity in a display case for an acoustic guitar. Much more accurate than analog or cheaper/miniature hygrometers I’ve tried. Easy to connect to the X Sense base station, stable connection, and useful data stream. Overall a great performer and a tremendous value—Buy It!!

Mailbox Alarm, Security Cameras and Hygrometer All Work Great
Overall easy set up, good connection, work great.General:1. Every item has an easy step up.2. The range seems to be great. I’ve installed some smart switches, smart bulbs, and outlets that are quite touchy and don’t have very good range, but not these. Seem to come right back when we loose power. Knock on wood, we haven’t had problems with them going offline.3. I saw a comments that you can’t assign multiple accounts to the base station. This true, but you can put them all on one account and share them and that works fine. Note that the Mailbox Alarm and Hygrometer/Thermometers all share when added to the base station. For the Cameras you have to share each one individually.4. These units all take “normal” batteries (triple or double AA, can’t remember which) except the camera which have built in lithium rechargables. The app shows the battery strength which is handy.5. I think the dashboard would be better if you had an option to see a tabular (spreadsheet style) display, especially if you have a lot of devices. App in general works well, but could be better.6. No subscription required to get functionalityMailbox Alarm:Our mailbox is over 200 feet away and there is no line of sight, so I was concerned this would work but no problem.Hygrometers/Thermometers:These were $10 off for 3 with a base station, so that was cheaper then buying them individually. We have them outside (On a covered porch) and all over the house. We use some fans to move air from a finished basement to the upstairs to cut down on the AC. These have helped us improve the placement. Has an export data function, but I haven’t tried it yet.Cameras:1. You can get a cloud service subscription, but you don’t have to. Motion sensing works great. At medium it triggers on people but not the cats.2. We are mostly shady, but the solar cells seem to draw enough to keep the cameras charged up. You need to get a SD card per camera if you want to store and retrieve.3. The share function requires more steps and has to be done for each camera. Seemed to lag from when you shared to when you could access, but they all eventually worked (maybe 5 minutes?). Could be because some where updating firmware.4. These work where other items were not able to get on the WIFi.5. There is some lag in the motion alarm and the actual motion.6. You get a mic and speaker on each camera. Work fine with few second lag.7. Each camera takes it’s own SD card. Supposed to be able to download, but I haven’t found that.8. Viewing the recorded videos is 3 steps in the app (Click camera, then gear, then history) Would be better right Camera click. Not the greatest for picking out recordings (you have to scroll a line to a dot) but it all works.

Esta muy bien. Controlo desde casa la temperatura y umedad que tengo en un almacen de trabajo.

Easy to install, accurate readings of temperature and humidity, helpful display of history graphs, and the App is professional and user friendly